Effects of repeated-low level sodium chlorate administration on ruminal and fecal coliforms in sheep

Abstract

The objective of this study was to evaluate the efficacy of oral sodium chlorate administration on reducing total coliform populations in ewes. A 30% sodium chlorate product or a sodium chloride placebo was administered to twelve lactating Dorper X Blackbelly or Pelibuey crossbred ewes averaging 65 kg body weight. The ewes were adapted to diet and management. Ewes were randomly assigned (4/treatment) to one of three treatments which were administered twice daily by oral gavage for five consecutive days: a control (TC) consisting of 3 g sodium chloride/animal/d, a T3 treatment consisting of 1.8 g of sodium chlorate/animal/d, and a T9 treatment consisting of 5.4 g sodium chlorate/animal/d; the latter was intended to approximate a lowest known effective dose. Ruminal samples collected by stomach tube and freshly voided fecal samples were collected daily beginning 3 days before treatment initiation and for 6 days thereafter. Contents were cultured quantitatively to enumerate total coliforms. There were no significant differences in total coliform numbers (log₁₀ cfu/g) in the feces between treatments (P = 0.832). There were differences (P < 0.02) in ruminal coliform counts (log₁₀ cfu/mL) between treatments (4.1, 4.3 and 5.0 log₁₀/mL contents in TC, T3 and T9 Treatments, respectively) which tended to increase from the beginning of treatment until the 5th day of treatment (P < 0.05). Overall, we did not obtain the expected results with oral administration of sodium chloride at the applied doses. By comparing the trends in coliform populations in the rumen contents in all treatments, there was an increase over the days. The opposite trend occurred in the feces, due mainly to differences among rumen contents and feces in ewes administered the T9 treatment (P = 0.06). These results suggest that the low chlorate doses used here were suboptimal for the control of coliforms in the gastrointestinal tract of ewes.     

Temperature and air velocity effects on ethanol emission from corn silage with the characteristics of an exposed silo face

Volatile organic compounds (VOCs) from agricultural sources are believed to be an important contributor to tropospheric ozone in some locations. Recent research suggests that silage is a major source of VOCs emitted from agriculture, but only limited data exist on silage emissions. Ethanol is the most abundant VOC emitted from corn silage; therefore, ethanol was used as a representative compound to characterize the pattern of emission over time and to quantify the effect of air velocity and temperature on emission rate. Ethanol emission was measured from corn silage samples removed intact from a bunker silo. Emission rate was monitored over 12 h for a range in air velocity (0.05, 0.5, and 5 m s^?1) and temperature (5, 20, and 35 °C) using a wind tunnel system. Ethanol flux ranged from 0.47 to 210 g m^?2 h^?1 and 12 h cumulative emission ranged from 8.5 to 260 g m^?2. Ethanol flux was highly dependent on exposure time, declining rapidly over the first hour and then continuing to decline more slowly over the duration of the 12 h trials. The 12 h cumulative emission increased by a factor of three with a 30 °C increase in temperature and by a factor of nine with a 100-fold increase in air velocity. Effects of air velocity, temperature, and air-filled porosity were generally consistent with a conceptual model of VOC emission from silage. Exposure duration, temperature, and air velocity should be taken into consideration when measuring emission rates of VOCs from silage, so emission rate data obtained from studies that utilize low air flow methods are not likely representative of field conditions.     

Eutrophication trends in forest soils in Galicia (NW Spain) caused by the atmospheric deposition of nitrogen compounds

We calculated the sensitivity of Galician forest soils to eutrophication caused by atmospheric deposition of nitrogen compounds, using the Simple Mass Balance (SMB) method as described by [Posch, M., de Vries, W., Hettelingh, J.-P., 1995. Critical loads of sulphur and nitrogen. In: Posch, M., de Smet, P.A.M., Hettelingh, J.-P., Downing, R.J. Calculation and Mapping of Critical Thresholds in Europe. Status Report 1995, Coordination Center for Effects, National Institute for Public Health and the Environment, Bilthoven, The Netherlands, pp. 31-42]. Deposition values were used to calculate critical loads exceedance. Galician natural forest ecosystems can support nitrogen deposition loads of more than 10 kg Nha (-1) yr (-1). The lowest critical loads (approximately 10 kg Nha (-1) yr (-1)) mainly occurred in forest stands in the interior zone, while highest critical load values (approximately 68 kg Nha (-1) yr (-1)) were observed in eucalyptus stands at low altitudes in the littoral area. Exceedances based on N deposition levels, calculated from data recorded in 2001, occurred in 40% of the forest soils, showing the need to control N emissions in these areas to prevent possible eutrophication of soils and waters. Analysis of rainfall bulk composition revealed that ammonium, probably derived from agricultural and cattle activities, was the main compound responsible for N deposition in Galicia.     

Treatment of effluent from re‐refined lubricating oils by combined processes of coagulation,flocculation, and Fenton process

This work examines the possibility and the potential application of physicochemical processes (coagulation and flocculation) and advanced oxidative processes (Fenton Process) in the treatment of effluents from the re‐refining of used lubricating oils.     

Analysis of heavy metals and aromatics compounds in soil layers of a sanitary landfill

Solid waste presents the potential for contamination of the soil when it is improperly managed. One of the great challenges of today's society is to promote the proper disposal of municipal solid waste in order to guarantee the safety of public health and to avoid risks to the environment. In this context, the objective of this study is to analyze the concentration profiles of heavy metals and aromatic hydrocarbons of risk that human health in landfill soil. Such works provides an important tool to evaluate the possible presence of contaminants from inappropriate waste disposal, as well as to assist in the management of waste and to prevent environmental contamination. In order to analyze cadmium (Cd), lead (Pb), nickel (Ni), arsenic (As), and mercury (Hg), which are toxic elements, and aromatic hydrocarbons, including benzene, toluene, ethylbenzene, o‐xylene, m‐xylene, and p‐xylene, soil samples were collected at different sites and depths. Neither Cd nor As was detected in any of the samples that were analyzed. Pb levels ranged from 5.34 milligrams per kilograms (mg/kg) to 7.40 mg/kg, Ni levels ranged from 2.17 mg/kg to 3.00 mg/kg, and Hg levels ranged from 75.4 micrograms per kilograms (μg/kg) to 88.3 μg/kg. The aromatic hydrocarbon compounds of benzene, toluene, ethylbenzene, and o‐xylene were below 5.5 μg/kg, and m‐, p‐xylene was below 11 μg/kg. The analysis of heavy metals and aromatic hydrocarbons present in the landfill soil showed concentrations below the soil quality guideline values of the Brazilian National Environment Council (CONAMA) Resolution 420, which has criteria for the presence of chemical substances in soil for Brazil. Therefore, the low levels of chemicals may be related to the operational time of the landfill or to the population profile of the municipality, which is predominantly composed of persons involved in family‐based agriculture.     

Biodegradation of phthalate esters during the mesophilic anaerobic digestion of sludge

Phthalic acid esters (PAE) are commonly found in the sludge generated in the wastewater treatment plants. Anaerobic digestion followed by land application is a common treatment and disposal practice of sludge. To date, many studies exist on the anaerobic biodegradation rates of PAE, especially of the easily biodegradable ones, whereas the higher molecular weight PAE have reported to be non-biodegradable under methanogenic conditions. Furthermore, there is no information on the effect of the PAE on the performance of the anaerobic digesters treating sludge. In this study, the anaerobic biodegradation of di-n-butyl phthalate (DBP), di-ethyl phthalate (DEP) and di-ethylhexyl phthalate (DEHP) was investigated and their relative rates of anaerobic degradation were calculated. Also, the biological removal of PAE during the anaerobic digestion of sludge in bench-scale digesters was investigated using DBP and DEHP as model compounds of one biodegradable and one recalcitrant PAE respectively. The degradation of all the PAE tested in this study (DEP, DBP and DEHP) is adequately described by first-order kinetics. Batch and continuous experiments showed that DEP and DBP present in sludge are rapidly degraded under mesophilic anaerobic conditions (a first-order kinetic constant of 8.04 x 10(-2) and 13.69 x 10(-2)-4.35 day(-1) respectively) while DEHP is degraded at a rate between one to two orders of magnitude lower (0.35 x 10(-2)-3.59 x 10(-2) day(-1)). It is of high significance that experiments with anaerobic sludge of different origin (US and Europe) showed that degradation of DEHP occurs under methanogenic conditions. Accumulation of high levels of DEHP (more than 60 mg/l) in the anaerobic digester has a negative effect on DBP and DEHP removal rates as well as on the biogas production.     

Design of aquifer remediation systems: (2) estimating site-specific performance and benefits of partial source removal

A Lagrangian stochastic model is proposed as a tool that can be utilized in forecasting remedial performance and estimating the benefits (in terms of flux and mass reduction) derived from a source zone remedial effort. The stochastic functional relationships that describe the hydraulic "structure" and non-aqueous phase liquid (NAPL) "architecture" have been described in a companion paper (Enfield, C.G., Wood, A.L., Espinoza, F.P., Brooks, M.C., Annable, M., Rao, P.S.C., this issue. Design of aquifer remediation systems: (1) describing hydraulic structure and NAPL architecture using tracers. J. Contam. Hydrol.). The previously defined functions were used along with the properties of the remedial fluids to describe remedial performance. There are two objectives for this paper. First, is to show that a simple analytic element model can be used to give a reasonable estimate of system performance. This is accomplished by comparing forecast performance to observed performance. The second objective is to display the model output in terms of change in mass flux and mass removal as a function of pore volumes of remedial fluid injected. The modelling results suggest that short term benefits are obtained and related to mass reduction at the sites where the model was tested.     

The importance of crossroads in faecal marking behaviour of the wolves (<Emphasis Type="Italic">Canis lupus</Emphasis>)

For wolves (Canis lupus) scats play an important function in territorial marking behaviour. Depositing scats at strategic sites such as crossroads and on conspicuous substrates probably increases their effectiveness as visual and olfactory marks. It is therefore likely that scats will be deposited, and will accumulate, at particular crossroads where the probability of being detected by other wolves is greatest. To check this hypothesis, a wolf population in NW Spain was studied for two consecutive years, from May 1998 to March 2000, and the spatial distribution of 311 scats detected along roads (both at and away from crossroads) was analysed. This study was conducted over an area of 12,000 ha in Montes do Invernadeiro Natural Park. The results confirm that wolves preferably deposit their scats at crossroads (60.1%) and on conspicuous substrates (72.1%). Significantly more scats were found at intersections with numerous, easily passable roads connecting distant territories. Thus, wolves preferably deposit their faeces at crossroads with high accessibility and driveability. The larger the surface area of the crossroads, the more scats were found. Crossroads are therefore highly strategic points that facilitate the detection of scats.     

Quality and sustainability in the production process: A study of bakeries using an integrated multi-criteria method based on fuzzy AHP and fuzzy TOPSIS

The objective of the present study is to evaluate, determine, and apply alternatives for improving the quality of the process and the product, with an emphasis on sustainable practices, using an integrated multi-criteria method. For this purpose, an analysis was conducted at a chain of bakeries, aiming to highlight bottlenecks in the production process and in the product. With the support of a literature review, four criteria and seven alternatives were defined to overcome these bottlenecks and, at the same time, contribute to the sustainability of the organization. For data analysis, six decision makers were interviewed and, following their evaluations, an integrated method based on fuzzy AHP and fuzzy TOPSIS was created. The fuzzy AHP was adopted to establish the importance of the criteria, while the fuzzy TOPSIS was used to evaluate and classify the alternatives developed to bypass the bottlenecks. The results revealed that of the criteria, Criterion “Cr1 – Quality” was prioritized. On the other hand, the alternative with the best performance was “A3 – Physical Layout Reorganization”. Applying this alternative, the study demonstrates the results achieved such as reduction of errors and accident risks, as well as greater fluidity in the productive space. the present study also makes theoretical and managerial contributions to the field, bringing the theory closer to the reality of companies that operate in the food sector.